Farmhouse Table Stain Color Ideas — Refinish Your Table With Desipred Shades (2023)
Refinishing tables is an essential step you must take to revitalize old, worn-out tables and improve their overall look. However, not everyone understands what it takes to do that.
Our team of experts will explain the processes involved in refinishing tables with the right farmhouse table satin color.
Farmhouse Table Satin Color
Farmhouse table satin color is a type of finish for wood that helps to preserve a farmhouse table from further undergoing wear. Additionally, the finish adds beauty to the table and enhances its overall outlook.
Brands like Minwax, Rust-Oleum, and TotalBoat are popular for making the best wood satin finishes. Our experts recommend using satin finishes from any of these brands.
Satin finishes, when applied, dry into several colors like amber, red, orange, and polished brown. The most common color is polished brown, and the appeal is usually incredible.
Tools and Supplies Needed
To refinish a farmhouse table and add satin color to it, you need to get the following tools and supplies.
- Latex gloves
- Rags
- Paintbrushes
- Orbital sander
- Coarse and fine-grit sandpaper (80-grit, 120-grit, and 220-grit)
- Pre-stain wood conditioner (Minwax)
- Wood stain finish (Minwax, Rust-Oleum or TotalBoat)
- Polycrylic water-based satin
Sand the Table
The first step to adding a farmhouse table satin color is by sanding it. Sanding doesn't only help to strip off the paint but ensures that the color to be added sticks to the table well.
Now, you could use an orbital sander with a coarse grit sanding disk or 80-grit sandpaper to strip off the existing paint or finish. In two or three passes, you should expect the stain to be removed entirely.
Be careful not to sand into the veneer, as this will cause an uneven finish in the end and affect the wood's durability. Apply only minimal pressure while sanding. After sanding, clean the sanded table with a wet rag to get rid of the dust.
Apply Pre-Stain Conditioner
Next is to apply the pre-stain conditioner with a paintbrush. Apply the conditioner to the table's surface and legs evenly in two coats at least. Doing this is to create an even base for the stains to stick to.
The good thing about pre-stain conditioners is that they dry super fast, so you don't have to wait too long before applying the satin color. Most pre-stain conditioners dry in ten minutes.
After application, wash the conditioner off the paintbrush.
Color Application
After the pre-stain conditioner is dry, pour the wood stain finish into a separate container. If it is too thick, our team of experts recommends that you thin the color with some mineral spirit and stir thoroughly until even. Then apply onto the table.
You can use a rag or brush to apply in even horizontal strokes. Allow the application to dry for about five minutes. Remember to wash the wood finish off the brush.
Coating Your Table
After the first coat must have dried, clean off any residue, dust, or extra stain. Wait for another twenty minutes and sand the surface with a less abrasive 120-grit sandpaper. This is to smoothen the surface and prepare it for the next coat.
Applying Polycrylic and Light Sanding
This is the final step to adding beautiful satin color to your old table. Using your brush or rag, apply the polycrylic in fast, even coats [1]. While doing this, remember not to over brush to avoid creating bubbles and streaks.
After applying this coat, allow it to dry for at least two hours. Sand lightly using a fine-grit or extra-fine sandpaper and wipe the sawdust off the table.
You may notice some holes and dents on the table's surface after sanding. Although this doesn't affect the coating result due to the satin's low sheen and flattering look, you may still not like it. You shouldn't be bothered about it because you can conveniently fill them up.
Gather the sawdust you sanded off the table. Add some glue to it and mix properly.
Fill the holes and dents with the sawdust and allow them to dry. Apply another thin coat of polyacrylic afterward evenly.
If you are yet to achieve your desired table finish, sand the table again with extra-fine sandpaper and apply another coat of polycrylic.
Now that you are done with the final round of coating, allow the table to dry overnight before touching it. In the end, your table will look fabulous and well-finished like a newly purchased piece of furniture.
Frequently Asked Questions
How do you finish a rustic farmhouse table?
You must do lots of sanding and apply the right finishes to finish a rustic farmhouse table. To do that, you need tools and supplies like a sander, brushes, coarse and extra-fine sandpapers, pre-satin conditioner, stain finish, and water-based satin.
What is the most popular satin color for furniture?
The most popular satin color for furniture is coffee or brown color. This color easily blends with the wood, making it look all-natural, beautiful, and durable.
Brands like Minwax, Rust-Oleum, and TotalBoat make satin products that dry into beautiful brown color finishes.
Conclusion
Refinishing a table with a farmhouse table satin color is not as complicated as you think. You need to understand the tools and supplies required and know the processes involved to get it done.
With all the steps explained here by our team, refinishing your farmhouse table won't pose any issue to you. The steps are self-explanatory and comprehensive enough for a beginner to understand.
Adding satin color to a farmhouse table is worth doing. It doesn't only make the table look attractive but preserves it for more extended use. Refinishing a farmhouse table protects the wood from wood-eating insects and scratches.
